Gun For Mould

Price 1000.0 INR/ Piece

Get a Price/Quote

MOQ : 1 Piece

Main Domestic Market
Central India, West India, All India, East India, Gujarat, Karnataka, Kerala, Lakshadweep, North India, Mizoram, Jharkhand, Andaman and Nicobar Islands, Arunachal Pradesh, South India, Dadra and Nagar Haveli, Sikkim, Tamil Nadu, Meghalaya, Manipur, Andhra Pradesh, Bihar, Chandigarh, Daman and Diu, Goa, Odisha, Punjab, Assam, Delhi, Telangana, Tripura, Uttarakhand, West Bengal, Chhattisgarh, Haryana, Himachal Pradesh, Jammu and Kashmir, Madhya Pradesh, Maharashtra, Nagaland, Rajasthan, Pondicherry, Uttar Pradesh

Specification:

Gun, to connect to a water or air pressure, to eject the specimen from the PU and ABS moulds

Common specifications for mould release agent spray guns:

Air Pressure:Typically ranges from 29 PSI (2 BAR) to 100 PSI (6.9 BAR).
Nozzle Size:Commonly available in sizes like 0.3mm, 0.5mm, and 4mm.
Air Consumption:Varies, but can range from 5 to 7 CFM (cubic feet per minute) or 60 L/Min.
Fluid Output:Measured in cc/min or ml/min, often around 150 cc/min or 35 ml/min.
Air Inlet:Usually 1/4" NPT or 6mm.
Material:The gun body can be made of forged aluminum, and the fluid path is often stainless steel.
Weight:Lightweight, with some models weighing around 270g or 320g.
Spray Pattern:Can be round or flat, depending on the application and nozzle used.
Feed Type:Can be suction feed or pressure feed, depending on the viscosity of the release agent.

Specific Examples:

The Painter FG-05 is designed for water-based paints, primers, and textured paints, with a 4mm nozzle and 85 l/min air consumption.
Tradeindia.comlists a mould release spray gun with a 0.3/0.5mm nozzle, 60 L/Min air consumption, and a 145-gram weight.
Made-in-China.comdetails a mould release agent spray gun with a 0.5mm nozzle, 29 PSI operating pressure, and a 270g weight.